|
|
"O"- Ring Seals1
|
|
Viton-A® -A or Other O-rings Available Upon Request
|
|
|
|
Handle/Retainer
|
|
S/S - Type 316
|
|
|
|
Pressure Rating
|
|
150 psi at 73º F
|
|
|
|
Options
|
|
UMB-1, 1/8" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves
UMB-1, 1/4" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves
UMB-2, 3/8" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves
UMB-2, 1/2" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves
UMB-3, 3/4" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves
UMB-5, 1-1/2" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves
UMB-5, 2" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves
|
|
|
1 Viton-A® Reg. T.M. DuPont Dow Elastomer
|
|
|
|
|
|
Valve Drawing
|
|
|
|
|
|
|
|
|
|
|
|
Flow Pattern
|
|
|
|
|
|
|
|
|
In-Line Maintenance
|
|
Valve completely disassembles In-Line. Remove Handle "A", slide stem out for cleaning or O-ring replacement. Reassemble, and in minutes you're back in operation. All Valve styles have this feature.
Note: Threaded connections use Teflon thread tape. Apply to male thread of pipe to give complete thread coating. Make up hand tight. Then strap wrench 1/2 to 1 turn only.
Note: Excessive tightening will weaken thread and cause leaking joint. Do not use pipe wrench or pliers, as they will scar and weaken the material. Strap wrenches supply sufficient torque.
|
|
|
|
|
|
|
|
|
|
Optional Features
|
|
- Manual, Electric or Air Actuation Available
- Mounting Brackets
- Extended Stem for Back or Panel Mount
- Stack Valve
- Lock-out System
- Natural Polypropylene
|
|
|
|
|
|
