All Categories > Electric Actuated Valves > Electric Actuated Valves - 24 VDC > 5-Way Electric Actuated Valves - 24VDC > 5-Way Electric Valves: BELL (Double "L") - 24VDC > Item # 345-PV-BELL-RE13  


Item # 345-PV-BELL-RE13, 3/8" 4 Position 5-Way PVDF Bottom Entry Double L Electric Actuated 24VDC

Provides automated valve control from a central location or for valves in remote locations.

Operating Function:
115 VAC Reversible Motor - Standard
12 or 24 VDC Reversible Motor
24 or 230 VAC Reversible Motor
Also available unidirectional - 360º
NEMA IV Construction standard
Cycle Time/90º - 3.5 seconds





Specifications and Allowable Operating Conditions  · Dimensions  · Materials  · Flow Solutions  · Additional Information  · Optional Features

Specifications and Allowable Operating Conditions

Action
Reversible

Supply Voltages (AC) (±10% - 50/60Hz)
24 V
115 V
220 V

Supply Voltages (DC) (±10%)
12 V
24 V
90 V

Temperature Range with Heater
-18 to -71 ºC
0 to 160 ºF

Temperature Range without Heater
-40 ºC
-40 ºF

Enclosure Rating
CSA Enclosure 4
NEMA 4, 4X

AC Motor Type
Permanent Split Capacitor, Class B Insulation

DC Motor Type
Brush Type

AC Motor Thermal Protection
Automatically resetting

Travel and Aux. Switches
1/2 Amp 125 VDC
15 Amp 125 VAC, 1/2 HP 10 Amp 250 VAC
SPDT, Form C

Conduit Connections
1/2-14 NPT

Manual Override
300 in-lbs Max input

Corrosion Protection
Chromate Conversion Coated
Polyester electrostatic powder top coat

Opt. Terminal Strip Hookup
12-26 AWG
30 Amp
300 V

Lubrication
Permanently Lubricated

Gear Train
Heat treated alloy steel able to withstand stall torque conditions

Options
MAAE, Mounting Arm
DMC, Digital Modulating Controller


Dimensions

Size NPT1
3/8 in.

A
3 in.

B
5-1/2 in.

C
8-3/8 in.

D
5-1/8 in.

E
13/16 in.

F
2-3/8 in.

G
3 in.

H
2-3/4 in.
1 Electric Actuated


Materials
Actuator Body Die Cast Aluminum Elliptic Polypropylene or PVDF
Coupling Aluminum "O"- Ring Seals Viton A (Viton-A Reg. T.M. - DuPont Dow Elastomer)
Adapter Plate Nylon Retainer SS - Type 316
Mounting Bracket Polypropylene Screws Cap Head
Connection Threaded - (FNPT)    




Flow Solutions

Flow Pattern
The RE series delivers 125 and 300 in-lbs of torque in a completely enclosed compact package. The RE series is equipped with a limit switch that provides full control over flow solutions. With the use of a 5/64” hex wrench to adjust the setscrew, the RE series can be adjusted to give as much as 270° or as little as 30° operation. The image to the right shows the different flow solutions, the RE series is capable of.


Additional Information

In-Line Maintenance

Elliptomatic Electric Actuated Valves completely disassembles In-Line. Remove Handle "A", slide stem out for cleaning or O-ring replacement. Reassemble, and in minutes you're back in operation. All Valve styles have this feature.
Note: Excessive tightening will weaken thread and cause leaking joint. Do not use pipe wrench or pliers, as they will scar and weaken the material. Strap wrenches supply sufficient torque.
Note: Threaded connections use Teflon thread tape. Apply to male thread of pipe to give complete thread coating. Make up hand tight. Then strap wrench 1/2 to 1 turn only.


Optional Features

Optional Features
  • Mounting Arm
  • Digital Modulating Controller (DMC) - for Proportional or Mixing Control
  • NEMA VII
  • Stack Valve
  • Extra Switches -Field Switch Kits Available
  • Heater and Thermostat-Prevents Condensation Buildup and Corrosion