Item # 223-PP-MX, 1/4" 2 Position 3-Way Polypropylene Mixing Stem On EVSCO, Inc.

All Categories > Mixing / Proportioning / Throttling Valves > Mixing Stem Elliptic Valves > Mixing Stem 2 Position 3-Way Elliptic Valves > Item # 223-PP-MX


	Item # 223-PP-MX, 1/4" 2 Position 3-Way Polypropylene Mixing Stem

Ball valve alternative

1/4 Turn
Flow Diversion
No Deadhead
Sampling or Bypass
Run/Recycle

Please see the More Images sidebar for full-sized flow pattern images.

larger image

larger image

Specifications · Valve Drawing · Dimensions · Flow Solutions · Additional Information · Optional Features

Specifications

"O"- Ring Seals¹

Viton-A® -A or Other O-rings Available Upon Request

Handle/Retainer

S/S - Type 316

Pressure Rating

150 psi at 73º F

Options

UMB-1, 1/8" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves
UMB-1, 1/4" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves
UMB-2, 3/8" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves
UMB-2, 1/2" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves
UMB-3, 3/4" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves
UMB-5, 1-1/2" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves
UMB-5, 2" Mounting Bracket for 2-Way, 2 Position 3-Way and 4 Position 3-Way Valves

¹ Viton-A® Reg. T.M. DuPont Dow Elastomer

Valve Drawing

Valve Drawing		Dimensions larger image

Dimensions

Size NPT		1/4 in.

Handle Diameter		3/16 in.

A		2-1/4 in.

B		1-11/16 in.

C		2-1/4 in.

D		5/8 in.

E		1-1/16 in.

F		1-21/32 in.

G		1-3/8 in.

H = Extended Stem Add to G		1 in.

Flow Solutions

Flow Pattern		2-Way and 3-Way Flow Pattern larger image

Additional Information

In-Line Maintenance

Valve completely disassembles In-Line. Remove Handle "A", slide stem out for cleaning or O-ring replacement. Reassemble, and in minutes you're back in operation. All Valve styles have this feature.

Note: Threaded connections use Teflon thread tape. Apply to male thread of pipe to give complete thread coating. Make up hand tight. Then strap wrench 1/2 to 1 turn only.

Note: Excessive tightening will weaken thread and cause leaking joint. Do not use pipe wrench or pliers, as they will scar and weaken the material. Strap wrenches supply sufficient torque.

larger image

Optional Features

Optional Features		Manual, Electric or Air Actuation Available Mounting Brackets Extended Stem for Back or Panel Mount Stack Valve Lock-out System Natural Polypropylene

MORE IMAGES


	· 2P3-way-valve-90-degree-rotation

	· 2P3-way-valve-AL-port-valve-90-degree-rotation

Mounting Brackets



	Mounting Brackets

Valve Products

Item # 223-PP-MX, 1/4" 2 Position 3-Way Polypropylene Mixing Stem

"O"- Ring Seals1

Handle/Retainer

Pressure Rating

Options

Valve Drawing

Size NPT

Handle Diameter

A

B

C

D

E

F

G

H = Extended Stem Add to G

Flow Pattern

In-Line Maintenance

Optional Features

"O"- Ring Seals¹