855-635-4366

Valve Products

All Categories > Electric Actuated Valves > Electric Actuated Valves - 115 VAC > 2-Way Electric Actuated Valves - 115 VAC > Item # 22-PP-RE1  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 22-PP-RE1, 1/4" 2-Way Polypropylene Electric Actuated 115VAC



Provides automated valve control from a central location or for valves in remote locations.

Operating Function:
115 VAC Reversible Motor - Standard
12 or 24 VDC Reversible Motor
24 or 230 VAC Reversible Motor
NEMA IV Construction standard
Cycle Time/90º - 3.5 seconds





Specifications and Allowable Operating Conditions  · Valve Drawing  · Dimensions  · Materials  · Flow Solutions  · Additional Information  · Optional Features

Specifications and Allowable Operating Conditions

Action

Reversible

Supply Voltages (AC) (±10% - 50/60Hz)

24 V
115
V
220
V

Supply Voltages (DC) (±10%)

12 V
24
V
90
V

Temperature Range with Heater

-18 to -71 ºC
0 to 160
ºF

Temperature Range without Heater

-40 ºC
-40
ºF

Enclosure Rating

CSA Enclosure 4
NEMA 4, 4X

AC Motor Type

Permanent Split Capacitor, Class B Insulation

DC Motor Type

Brush Type

AC Motor Thermal Protection

Automatically resetting

Travel and Aux. Switches

1/2 Amp 125 VDC
15 Amp 125 VAC, 1/2 HP 10 Amp 250 VAC

SPDT, Form C

Conduit Connections

1/2-14 NPT

Manual Override

300 in-lbs Max input

Corrosion Protection

Chromate Conversion Coated
Polyester electrostatic powder top coat

Opt. Terminal Strip Hookup

12-26 AWG
30 Amp

300 V

Lubrication

Permanently Lubricated

Gear Train

Heat treated alloy steel able to withstand stall torque conditions

Options

MAAE, Mounting Arm
DMC, Digital Modulating Controller


Valve Drawing

Valve Drawing



Dimensions

Size NPT1

1/4 in.

A

3 in.

B

5-1/2 in.

C

7-15/16 in.

D

5-1/8 in.

E

11/16 in.

F

1-15/16 in.

G

2-1/4 in.

H

2-1/16 in.
1 Electric Actuated


Materials
Actuator Body Die Cast Aluminum Elliptic Polypropylene or PVDF
Coupling Aluminum "O"- Ring Seals Viton A (Viton-A Reg. T.M. - DuPont Dow Elastomer)
Adapter Plate Nylon Retainer SS - Type 316
Mounting Bracket Polypropylene Screws Cap Head
Connection Threaded - (FNPT)    




Flow Solutions

Flow Pattern

The RE series delivers 125 and 300 in-lbs of torque in a completely enclosed compact package. The RE series is equipped with a limit switch that provides full control over flow solutions. With the use of a 5/64” hex wrench to adjust the setscrew, the RE series can be adjusted to give as much as 270° or as little as 30° operation. The image to the right shows the different flow solutions, the RE series is capable of.


Additional Information

In-Line Maintenance

Elliptomatic Electric Actuated Valves completely disassembles In-Line. Remove Handle "A", slide stem out for cleaning or O-ring replacement. Reassemble, and in minutes you're back in operation. All Valve styles have this feature.
Note: Excessive tightening will weaken thread and cause leaking joint. Do not use pipe wrench or pliers, as they will scar and weaken the material. Strap wrenches supply sufficient torque.

Note: Threaded connections use Teflon thread tape. Apply to male thread of pipe to give complete thread coating. Make up hand tight. Then strap wrench 1/2 to 1 turn only.


Optional Features

Optional Features

  • Mounting Arm
  • Digital Modulating Controller (DMC) - for Proportional or Mixing Control
  • NEMA VII
  • Stack Valve
  • Extra Switches -Field Switch Kits Available
  • Heater and Thermostat-Prevents Condensation Buildup and Corrosion


 MORE IMAGES 

·  Part Diagram

·  Typical AC Wiring Schematic Elliptic Valves

·  Typical DC Wiring Schematic Elliptic Valves

·  2-way-on-off-throttling-and-proportioning-mixing-valve


 DOWNLOADS 

Elliptomatic Series Electric Actuated Valves Use and Care Manual
(PDF, 348KB)



 Mounting Arm 


Mounting Arm
Mounting Arm

 Digital Modulating Controller (DMC) 


Digital Modulating Controller
Digital Modulating Controller